RAM 3500 Truck 4WD L6-6.7L DSL Turbo (2008)
Drive Belt: Removal and Replacement
Accessory Drive Belt - Removal
6.7L DIESEL
Belt Routing-Diesel Engine Without A/C
1. A 1/2 inch square hole is provided in the automatic belt tensioner. Attach a suitable tool into this hole.
BELT ROUTING-DIESEL WITH A/C
2. Rotate tensioner assembly clockwise (as viewed from front) until tension has been relieved from belt.
3. Remove belt from water pump pulley first.
4. Remove belt from vehicle.
