RAM 3500 Truck 4WD L6-6.7L DSL Turbo (2008)
Blower Motor Resistor: Service and Repair
Installation
INSTALLATION
1. Position the blower motor resistor (4) into the opening of the HVAC housing (3) near the blower motor (5).
2. Install the two screws (1) that secure the blower motor resistor to the HVAC housing. Tighten the screws to 1.1 Nm (10 in. lbs.).
3. Connect the wire harness connector (2) to the blower motor resistor.
4. Reconnect the negative battery cable.
