dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Diagnosis and Testing|Page 6673 > < Diagnosis and Testing|Page 6671
Page 1
background image

Intercooler: Service and Repair
Cleaning

CLEANING

CAUTION: Do not use caustic or acid based cleaners to clean the charge air cooler. Damage to the charge air cooler will result.

NOTE: If internal debris cannot be removed from the cooler, the charge air cooler MUST be replaced.

NOTE: Charge air cooler must be a room temperature for this procedure.

1. If the engine experiences a turbocharger failure or any other situation where oil or debris get into the charge air cooler, the charge air cooler must

be cleaned internally.

2. Remove charge air cooler  See: Removal
3. Position the charge air cooler so the inlet and outlet tubes are vertical.
4. Flush the cooler internally with solvent such as mineral spirits in the direction opposite of normal air flow.
5. Shake the cooler and lightly tap on the end tanks with a rubber mallet to dislodge trapped debris.
6. Continue flushing until all debris or oil are removed.
7. Rinse the cooler with hot soapy water to remove any remaining solvent.
8. Rinse thoroughly with clean water and blow dry with compressed air.

Diagnosis and Testing|Page 6673 > < Diagnosis and Testing|Page 6671