RAM 3500 Truck 4WD L6-6.7L DSL Turbo (2008)
Control Arm Bushing: Service and Repair
Removal
Lower Control Arm Bushings - 4X4 (LD)
LOWER CONTROL ARM BUSHINGS - 4X4 (LD)
1. Remove the lower control arm See: Service and Repair/Front Lower Control Arm - Removal .
2. Secure the control arm in a soft jaw vise.
NOTE: Extreme pressure lubrication must be used on the threaded portions of the tool. This will increase the longevity of the tool and insure
proper operation during the removal and installation process.
3. Remove the bushing (3) using special tool C-4212F (PRESS) (1), 9772-6 (receiver) (6), 9772-4 (SPACER) (5) and 9772-3 (driver) (2)
Upper Control Arm Bushings - IFS (LD)
UPPER CONTROL ARM BUSHINGS - IFS (LD)
1. Remove the upper control arm See: Service and Repair/Front Upper Control Arm - Removal .
2. Secure the control arm in a soft jaw vise.
NOTE: Extreme pressure lubrication must be used on the threaded portions of the tool. This will increase the longevity of the tool and insure
proper operation during the removal and installation process.
3. Remove the bushing (3) from the upper control arm (5) using special tool C-4212F (PRESS) (1), 9777-3 (receiver) (4), and 9601-1 (driver) (2).
Upper Control Arm Bushings - IFS (HD)
UPPER CONTROL ARM BUSHINGS - IFS (HD)