RAM 3500 Truck 4WD L6-6.7L DSL Turbo (2008)
Stabilizer Link: Service and Repair
Front Stabilizer Link - Installation
4X4 - Independent Front Suspension
4X4
1. Install the stabilizer link (5) to the vehicle.
2. Install the lower nut (6) and Tighten to 102 Nm (75 ft. lbs.).
3. Install the retainers, grommets and upper nut (4) and Tighten to 27 Nm (20 ft. lbs.).
4. Remove the support and lower the vehicle.
Stabilizer Link - Link/Coil
STABILIZER LINK
1. Install links (5) to the axle bracket (4) and tighten nut to 149 Nm (110 ft. lbs.).
2. Install links (5), retainers (1), grommets (2) and nuts to the stabilizer bar. Hold the link shaft with a wrench and tighten the nuts to 38 Nm (27 ft.
lbs.).
3. Remove the supports and lower the vehicle.
Stabilizer Link With Disconnecting Stabilizer Bar - Link/Coil
STABILIZER LINK WITH DISCONNECTING STABILIZER BAR