RAM 3500 Truck 4WD L6-6.7L DSL Turbo (2008)
1. Remove the nut, retainer (4) and grommet (1) from the upper stud in the engine compartment.
2. Remove three nuts from the upper shock bracket (3).
3. Remove the lower bolt (4) from the axle bracket. Remove the shock absorber (1) from engine compartment.
4X4-Coil Over - Independent Front Suspension
4X4-COIL OVER
NOTE: All suspension components should be tighten with the weight of the vehicle on them (curb height).
1. Install the shock (1) back in place in the vehicle.
