RAM 3500 Truck 4WD L6-6.7L DSL Turbo (2008)
3. Position flange on pinion shaft with reference marks aligned.
4. Install pinion flange (1) new pinion nut.
5. Hold flange with Holder C-3281 (2) and tighten pinion nut to 500 Nm (369 ft. lbs.).
6. Bend pinion flange (1) nut (2) collar into pinion keyway with a hammer and punch.
7. Install propeller shaft with reference marks aligned.
Removal
REMOVAL
1. Remove axle shaft.
2. Remove axle shaft seal (1) from the axle tube with a seal puller.
Installation
