RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
3. Using a small flat-bladed tool, carefully open the two fastener covers (2) located on the grab handle (1).
4. Remove the two bolts (3) that secure the grab handle to the B-pillar and remove the grab handle.
5. Remove the cap (1) and the bolt (2) that secures the seat belt (3) to the top of the B-pillar (4) and position the seat belt out of the way.
6. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the upper B-pillar trim panel (5) to the B-pillar and remove the
trim panel.
Installation
INSTALLATION
REGULAR CAB
