RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Utility Storage Compartment: Service and Repair
Under Seat Storage Bin Lid
Removal
REMOVAL
NOTE: Do not reuse the seat fasteners, always replace with new ones.
1. Open the center seat cushion/storage bin.
2. Position the seat cushion cover aside, remove the hinge bolts (2) and discard.
3. Remove the seat cushion (4).
Installation
INSTALLATION
NOTE: Do not reuse the seat fasteners, always replace with new ones.
1. Position the center seat cushion (4) on the hinges (3) and install new bolts (2).
2. Tighten the bolts (2) to 20 Nm (15 ft. lbs.).