RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
2. Tighten the bolts (1) to 25 Nm (18 ft. lbs.).
3. Install the rear seat.
Removal
REMOVAL
1. Remove the rear seat back.
2. Remove the headrest sleeves.
3. Unzip the zip strip at the bottom of the seat back and remove the cover.
Installation
INSTALLATION
1. Install the seat back cover and connect the zip strip.
2. Install the headrest sleeves.
3. Install the seat back.
Removal
REMOVAL
1. Remove the rear seat.
2. Remove bolts (2) and remove the loop (1).
Installation
INSTALLATION
1. Install the loop (1) and install the bolts (2).