RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Parking Brake Backing Plate: Service and Repair
Installation
INSTALLATION
1. Install support plate (1) on axle flange. Tighten attaching bolts (2) to 68 Nm (50 ft. lbs.) LD or 203 Nm (150 ft.lbs) HD.
2. Install parking brake cable in the brake lever.
3. Install the park brake shoes.
4. Install axle shaft.
5. Adjust brake shoes to drum with brake gauge.
6. Install the rotor.
7. Install the caliper adapter.
8. Install the caliper.
9. Install the wheel and tire assembly.
