RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
2. Install the screws (1) that secure the blend door actuator (2) to the HVAC housing (3). Tighten the screws to 1.1 Nm (10 in. lbs.).
3. Connect the HVAC wire harness connector (4) to the blend door actuator.
4. Install the instrument panel.
5. Reconnect the negative battery cable.
DUAL ZONE PASSENGER SIDE
6. Install the blend door actuator and bracket assembly (2) onto the top of the HVAC housing (3).
7. Install the screws (1) that secure the blend door actuator and bracket assembly to the HVAC housing. Tighten the screws to 1.1 Nm (10 in. lbs.).
8. Connect the HVAC wire harness connector (4) to the blend door actuator.
