RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Underhood Light Bulb: Service and Repair
Removal
BULB
1. Disconnect and isolate the battery negative cable.
2. Insert a small flat bladed tool in the access slot between the underhood lamp housing (1) and the lamp lens (2).
3. Gently pry the lens until it unsnaps from the lamp housing.
4. Depress the bulb holder (2) inward far enough to disengage the terminal loops (3) of the bulb (1) and remove the bulb from the lamp housing (4).
