RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Belt Routing - DIESEL WITH A/C
CAUTION: When installing the accessory drive belt, the belt must be routed correctly. If not, engine may overheat due to water pump rotating
in wrong direction.
1. Position drive belt over all pulleys except water pump pulley.
2. Attach a 1/2 inch ratchet to tensioner.
Belt Routing - DIESEL WITHOUT A/C
3. Rotate ratchet and belt tensioner clockwise. Place belt over water pump pulley. Let tensioner rotate back into place. Remove ratchet. Be sure belt
is properly seated on all pulleys.
