RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
9. Remove crossover tube doughnut gasket (1) and clean EGR valve. Also clean end of EGR tube of any old gasket material.
10. Remove two gaskets on bottom EGR valve (4). Clean bottom of EGR valve and top of its intake connection point of any old gasket material.
11. To prevent contaminants, cover the exposed opening at intake connection.
Removal-Cab/Chassis Models
REMOVAL-CAB/CHASSIS MODELS
1. Disconnect and isolate both negative battery cables at both batteries.
2. Remove four bolts (2) and remove EGR crossover tube cover (1).
