RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Stabilizer Link: Service and Repair
Rear
Removal
REMOVAL
1. Raise and support the vehicle.
2. Remove the upper nut (2) at the frame bracket.
3. Remove the lower link nut (3) at the stabilizer bar (4).
4. Remove the link (1) from the bar.
Installation
INSTALLATION
1. Install the link (1) to the bar (4).
2. Install the lower link nut (3) at the stabilizer bar. Tighten the nuts to 38 Nm (27 ft.lbs).
3. Install the upper link nut (2) at the frame bracket. Tighten the bolts to 61 Nm (45 ft.lbs).
4. Lower the vehicle.