RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
4. Position shock wrench 9362 (1), on shock shaft retaining nut. Next, insert 8 mm socket though Wrench onto hex located on end of shock shaft.
While holding shock shaft from turning, remove nut from shock shaft using Wrench (1).
5. Remove the upper shock nut.
6. Remove the shock upper mounting plate.
7. Remove and inspect the upper spring isolator (2).
8. Remove the shock.
Installation
4X4-COIL OVER
1. Position the shock (1) into the coil spring (3).
2. Install the upper isolator (2).
