RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
3. Install the upper shock mounting plate (2).
4. Install the shock upper mounting nut.
5. Install shock wrench 9362 (1) (on end of a torque wrench), on shock shaft retaining nut. Next, insert 8 mm socket though Wrench onto hex located
on end of shock shaft. While holding shock shaft from turning, tighten nut using Wrench to 90 Nm (66 ft. lbs.) torque.
6. Decompress the spring (2).
7. Remove the shock assembly from the spring compressor tool (1).
8. Install the shock assembly (1).