RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Removal
REMOVAL
1. Remove the nut (1) securing the auxiliary spring bumper (2) to the bracket.
2. Remove the auxiliary spring bumper (2).
Installation
INSTALLATION
1. Install the auxiliary spring bumper (2).
2. Install the nut (1) securing the auxiliary spring bumper (2) to the bracket. Tighten the nut to 25 Nm (34 ft. lbs.).
Removal
REMOVAL
1. Raise and support the vehicle.
2. Remove both rear tire and wheel assemblies
