RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Axle Bearing: Service and Repair
Rear Axle - 10 1/2 AA
Removal
REMOVAL
1. Remove axle shaft flange bolts and remove axle shaft.
2. Remove retainer ring (1) from axle shaft tube.
3. Remove hub bearing nut (1) locking key (2) from axle tube (3).
4. Remove hub bearing nut with Socket 8954.
5. Remove hub and bearings from the axle.
6. Pry out hub bearing seal from the back of the hub.
