RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
1. Raise axle with lift and align to the leaf spring centering bolts.
2. Install axle U-bolts (5) and tighten to 149 Nm (110 ft. lbs.).
3. Install shock absorbers to axle and tighten to specification.
4. Install all brake components.
5. Install axle vent hose.
6. Install propeller shaft with reference marks aligned and tighten to specification.
7. Fill differential to specifications.
Removal
REMOVAL
1. Remove axle shaft flange (1) bolts (2).
2. Slide axle shaft out of the axle tube.
3. Remove axle shaft gasket.
Installation
INSTALLATION
