RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
7. Remove electric locker connector (1) retainer (2) bolt from differential housing.
8. Remove connector (1) and retainer (2) from differential housing.
9. Remove retainer (1) from connector and remove O-ring (2) from connector.
10. Mark bearing caps (2) left and right for installation reference.
11. Remove bearing cap bolts and remove bearing caps (2).
12. Loosen differential bearing adjusters (3) with a hammer and punch.
13. Slid electric locker connector through differential housing.
14. Remove differential case with bearing cups from the housing.
15. Tag bearing cups left and right for installation reference.
Installation
INSTALLATION
