RAM 3500 Truck 4WD V10-8.0L VIN W (1997)
5.
On Club Cab models only, remove the six screws that secure the steering column reinforcement to the instrument panel (Figure 2) and remove the
reinforcement.
6.
Loosen but do not remove the two fuseblock module mounting screws (Figure 3).
7.
From underneath the instrument panel, gently push the fuseblock module towards the rear of the vehicle. At the same time, reach through the fuse
access panel opening in the left end of the instrument panel and unplug the buzzer module from the receptacle in the fuseblock module (Figure 4).
8.
Install buzzer module (pin 56OOIO77AB) by aligning the module terminals with the cavities in the fuseblock module receptacle, then push the
module firmly into place.