RAM 3500 Truck 4WD V10-8.0L VIN W (1997)
Horn Switch: Service and Repair
REMOVAL
WARNING: ON VEHICLES EQUIPPED WITH AN AIRBAG, REFER TO PASSIVE RESTRAINT SYSTEMS BEFORE ATTEMPTING
STEERING WHEEL OR STEERING COLUMN COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER
PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
1. Disconnect and isolate the battery negative cable. Wait two minutes for the airbag system capacitor to discharge before further service.
Speed Control Switch Or Trim Bar Remove/Install
2. From the underside of the steering wheel, remove the screws that secure the speed control switch or trim bar to the steering wheel.
Speed Control Switch Connector Remove/Install
3. Pull the switches or trim bar from the steering wheel. If equipped with speed control, unplug the wire harness connector from the switch.
