RAM 3500 Truck 4WD V10-8.0L VIN W (1997)
Fig. 8
5. Insert all of the wire terminals into their proper locations in the supplied connector EXCEPT TERMINALS "B2" and "R". Retape the wiring
bundle as necessary.
Fig. 8
6. For vehicles WITHOUT headlamp switch connector or terminal heat damage: Remove the PINK w/RED TRACER wire from location
"B2" and the BLACK w/YELLOW TRACER wire from location "R" of the headlamp switch connector using a small screwdriver, Miller
Special Tool # 8197 or equivalent.
Fig. 9
7. Insert the wire terminals that were originally in locations "B2" and "R" of the headlamp wiring connector into the supplied 2-way wiring
connector. Insert the PINK wired TRACER wire into the (+) cavity. Insert the BLACK w/YELLOW TRACER wire into the (-) cavity. Secure
the terminals with the provided 2-way wedge.
