RAM 3500 Truck 4WD V10-8.0L VIN W (1997)
3. Adjust the right wheel toe position with the drag link. Turn the sleeve until the right wheel is at the correct TOE-IN position. Position clamp
bolts to their original position and tighten to specifications. Make sure the toe setting does not change during clamp tightening.
4. Adjust left wheel toe position with tie rod at left knuckle. Turn the sleeve until the left wheel is at the correct TOE-IN position. Position clamp
bolts to their original position and tighten to specifications. Make sure the toe setting does not change during clamp tightening.
5. Verify the right toe setting.