RAM 3500 Truck 4WD V10-8.0L VIN W (1997)
3.
Wrap tool around line with smooth round end facing the connector (Figure 6).
4.
Close removal tool and lock tab. Push removal tool up to connector (Figure 7).
5.
Push removal tool into connector. Tool will push out retainer legs, pull connector over line bead (Figure 8).
6.
Pull line connector while holding onto line with one hand and the connector with the other (Figure 9).
Reconnect Procedure
1.
After performing the service that required the line to be disconnected, wipe the line end with a clean rag.
