RAM 3500 Truck 4WD V10-8.0L VIN W (1997)
4. Install the inner axle seal. The inner axle seal position is different on a 216 FBI axle then a 248 FBI axle. Be sure to use the correct installer.
5. Install the shift collar in the axle housing.
6. Lubricate the splined end of the intermediate axle shaft with multi-purpose lubricant.
7. Insert the intermediate axle shaft into the differential side gear.
CAUTION: Apply all-purpose lubricant to the axle shaft splines to prevent damage to the seal during axle shaft installation.
8. Insert the axle shaft into the tube. Engage the splined end of the shaft with the shift collar.
9. Install the vacuum shift motor housing.
