RAM 3500 Truck 4WD V10-8.0L VIN W (1997)
Axle Shaft: Testing and Inspection
General Information
Axle bearing problem conditions are usually caused by:
-
Insufficient or incorrect lubricant.
-
Foreign matter/water contamination.
-
Incorrect bearing preload torque adjustment.
-
Incorrect backlash.
Axle gear problem conditions are usually the result of:
-
Insufficient lubrication.
-
Incorrect or contaminated lubricant.
-
Overloading (excessive engine torque) or exceeding vehicle weight capacity.
-
Incorrect clearance or backlash adjustment.
Axle component breakage is most often the result of:
-
Severe overloading.
-
Insufficient lubricant.
-
Incorrect lubricant.
-
Improperly tightened components.