RAM 3500 Truck 4WD V10-8.0L VIN W HDC (1999)
Coolant Temperature Sensor/Switch (For Computer): Description and Operation
Engine Coolant Temperature Sensor (Typical)
ENGINE COOLANT TEMPERATURE SENSOR-PCM INPUT
The Engine Coolant Temperature (ECT) sensor is installed in the thermostat housing and protrudes into the water jacket. The sensor provides an
input voltage to the powertrain control module (PCM) relating coolant temperature. The PCM uses this input along with inputs from other sensors
to determine injector pulse width and ignition timing. As coolant temperature varies, the ECT sensor resistance will change. This change in
resistance results in a different input voltage to the PCM.
When the engine is cold, the PCM will operate in Open Loop cycle. It will demand slightly richer air-fuel mixtures and higher idle speeds. This is
done until normal operating temperatures are reached.
