RAM 3500 Truck 4WD V10-8.0L VIN W HDC (1999)
Daytime Running Lamp Control Unit: Service and Repair
Daytime Running Lamp Module (DRLM)
REMOVAL
1. Release hood latch an open hood.
2. Disengage wire connector from DRLM.
3. Remove screws attaching DRLM to left front inner fender panel.
4. Separate DRLM from fender.
INSTALLATION
1. Position DRLM on fender.
2. Install screws attaching DRLM to left front inner fender panel.
3. Engage wire connector to DRLM.
4. Close hood.
