RAM 3500 Truck 4WD V10-8.0L VIN W HDC (1999)
Canister Purge Solenoid: Service and Repair
CANISTER PURGE SOLENOID
Duty Cycle EVAP Canister Purge Solenoid Location
The duty cycle solenoid is attached to a bracket mounted to the right inner fender.
REMOVAL
1. Disconnect electrical wiring connector at solenoid.
2. Disconnect vacuum harness at solenoid.
3. Remove solenoid from support bracket.
INSTALLATION
1. Install solenoid assembly to support bracket.
2. Connect vacuum harness.
3. Connect wiring connector.