RAM 3500 Truck 4WD V10-8.0L VIN W HDC (1999)
Control Arm: Service and Repair
Upper Control Arm
REMOVAL
1. Raise and support the vehicle.
2. Remove the upper suspension arm nut and bolt at the axle bracket.
3. Remove the nut and bolt at the frame rail and remove the upper suspension arm.
INSTALLATION
1. Position the upper suspension arm at the axle and frame rail.
2. Install the bolts and finger tighten the nuts.
3. Remove the supports and lower the vehicle.
4. Tighten nut at the axle bracket to 121 Nm (89 ft. lbs.). Tighten nut at frame bracket to 115 Nm (85 ft. lbs.).