RAM 3500 Truck 4WD V10-8.0L VIN W HDC (1999)
Rotor Hub And Unit Wheel Bearing Assembly
8. Remove rotor hub/bearing assembly, brake shield and spacer from the steering knuckle.
Rotor Hub/Bearing Removal
NOTE: If rotor hub assembly will not come out of the knuckle, use Puller C-844 with extra Puller Leg C-844-1, or equivalents to remove the
assembly.
Rotor And Hub/Bearing
9. Press out the wheel studs/hub extension studs and separate the rotor from the hub.