RAM 3500 Truck 4WD V10-8.0L VIN W HDC (1999)
Fig. 11
5. If the rotating torque is to low, use Holder 6719 to hold the pinion yoke, and tighten the pinion shaft nut in 6.8 Nm (5 ft. lbs.) increments until
proper rotating torque is achieved.
6. Align the installation reference marks and attach the propeller shaft to the yoke.
7. Check and add lubricant to axle, if necessary.
8. Install brake rotors and calipers.
9. Install wheel and tire assemblies.
10. Lower the vehicle.