RAM 3500 Truck 4WD V8-360 5.9L VIN 5 Magnum (1998)
Speaker: Service and Repair
Rear Door
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the inside trim panel from the rear door.
Rear Door Speaker Remove/Install - Quad Cab
3. Remove the screws that secure the speaker near the rear of the rear door inner panel.
4. Pull the speaker away from the inner door panel far enough to access and unplug the wire harness connector from the speaker.
5. Remove the speaker from the door.
6. Reverse the removal procedures to install. Tighten the speaker mounting screws to 4 N.m (35 in. lbs.).
