RAM 3500 Truck 4WD V8-360 5.9L VIN 5 Magnum (1998)
Function 53 provides involved dealers with an updated VIN list of their vehicles. The customer name, address and phone number are listed if known.
Vehicles that have been lubricated are removed from Function 53 within several days of repair claim submission. To use this system, type "53," at the
"ENTER FUNCTION" prompt, then type "0RD973".
Completion Reporting and Reimbursement
Claims for vehicles that have been serviced must be submitted on the DIAL System.
Use the following labor operation number and time allowance:
Labor Operation
Time
Number
Allowance
Lubricate the secondary hood latch
LU-BE-BR-8Z
0.2 hours
NOTE:
Normal shop supplies such as general-purpose lubricants (tube or sprays) are not reimbursable separately on warranty claims.
NOTE:
Because this is a precursor to a future recall, the claims should be handled in accordance with the recall claim processing instructions. See the
Warranty Administration Manual, Recall Claim Processing Section, for complete instructions.
Service Procedure
Secondary Hood Latch Lubrication
1.
With the engine OFF, open the hood.
2.
Using Mopar Spray White Lube (Lithium Grease) or equivalent, spray the secondary hood latch pivot pin and return spring (Figure 1).
3.
Activate the secondary latch several times to ensure that the latch fully returns to the closed position and does not bind or stick.
4.
Close the hood, making sure that the primary latch is engaged.