RAM 3500 Truck 4WD V8-360 5.9L VIN 5 Magnum (1998)
Oxygen Sensor: Testing and Inspection
Heavy Duty Engines
Fig. 63 Left/Right Oxygen Sensor Location
The left and right 025 sensors are located on the left and right exhaust downpipes.
Each O2S heating element can be tested with an ohmmeter as follows:
Disconnect the O2S sensor connector. Connect the ohmmeter test leads across the white wire terminals of the sensor connector. Resistance should
be between 5 and 7 ohms. Replace the sensor if the ohmmeter displays an infinity (open) reading.