RAM 3500 Truck 4WD V8-360 5.9L VIN 5 Magnum (1998)
Pressure Plate: Service and Repair
REMOVAL
1. Raise and support vehicle.
Supporting Engine With Jack Stand And Wood Block-Diesel Model Shown
2. Support engine with wood block and adjustable jack stand. Supporting engine is necessary to avoid undue strain on engine mounts.
3. Remove transmission and transfer case, if equipped. Refer to Transmission and Transfer Case, for proper procedures.
Marking Clutch Cover Position
4. If clutch cover will be reused, mark position of cover on flywheel with paint or scriber.
5. Insert clutch alignment tool in clutch disc and into pilot bushing. Tool will hold disc in place when cover bolts are removed.
