RAM 3500 Truck 4WD V8-5.7L VIN D (2003)
Rear Door Hinge: Service and Repair
HINGE
REMOVAL
NOTE:
-
It is not necessary to remove the door to replace the hinges if they are replaced one at a time.
-
The epoxy coated washers should not be removed from the hinge. If the washers are removed the door may have to be re-adjusted.
1. Open the front door
UPPER HINGE
1. Using a grease pencil or equivalent, mark the position of the hinge (2) on the door and b-pillar.
2. Remove the nut (1) and bolt (9) attaching the hinge (2) to the door.
3. Remove the three bolts (6) attaching the hinge to the b-pillar and remove the hinge.
LOWER HINGE