RAM 3500 Truck 4WD V8-5.7L VIN D (2003)
Brake Rotor/Disc: Service and Repair
Rear Brake Rotor
Single Rear Wheels
REMOVAL- REAR
1. Raise and support the vehicle
2. Remove the tire and wheel assembly.
3. Remove the disc brake caliper.
4. Remove the caliper adapter bolts.
5. Remove the retaining clips and rotor assembly.
INSTALLATION- REAR
1. Install the rotor to the axle shaft.
2. Install the caliper adapter.
3. Install the caliper adapter bolts and tighten the mounting bolts to 135 Nm (100 ft. lbs.).
4. Install the disc brake caliper.
5. Install the tire and wheel assembly.
6. Lower the vehicle.
Dual Rear Wheels
ROTORS
REMOVAL
REAR DUAL WHEELS
1. Raise and support the vehicle
2. Remove the tire and wheel assembly.