RAM 3500 Truck 4WD V8-5.7L VIN D (2003)
Power Seat Switch: Testing and Inspection
Passenger Seat Switch Test
For circuit descriptions and diagrams, refer to Wiring.
1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat.
Fig. 5 Testing Passenger Power Seat Switch
3. Use an ohmmeter to test the continuity of the power seat switches in each position. See the Power Seat Switch Continuity chart. If OK, refer to
Power Seat Track Diagnosis and Testing in this group. If not OK, replace the faulty power seat switch.