RAM 3500 Truck 4WD V8-5.7L VIN D (2003)
CAUTION: Do not damage axle shaft seal during axle installation.
3. Install hub bearing in the knuckle.
4. Install hub bearing bolts and tighten to 202 Nm (149 ft. lbs.).
5. Install ABS wheel speed sensor, brake rotor and caliper.
6. Install axle washer and nut. Tighten axle nut to 179 Nm (132 ft. lbs.).
7. Rotate axle several 5 to 10 times to seat the wheel bearing.
8. Tighten axle nut to final torque of 356 Nm (263 ft. lbs.).
9. Align nut to next cotter pin hole and install new cotter pin.
10. Install wheel and tire assembly.
