RAM 3500 Truck 4WD V8-5.7L VIN D (2003)
Seals and Gaskets: Service and Repair
Extension Housing Seal
EXTENSION HOUSING SEAL
REMOVAL
1. Mark the propeller shaft and yoke for installation reference.
2. Remove the propeller shaft.
3. Remove extension housing seal (Fig. 132) using Remover C-3985-B.
4. On heavy duty 4X2 vehicles, remove extension housing seal with a pry tool or a slide hammer mounted screw.
5. On light duty transmissions, remove the extension housing bushing with Remover 6957.
6. On heavy duty transmissions, remove the extension housing bushing with Remover 8155.
INSTALLATION
1. Install housing bushing with Handle C-4171 (Fig. 133) and Installer.
^
Light Duty Installer 6951
^
Heavy Duty Installer 8161