RAM 3500 Truck 4WD V8-5.9L VIN Z LDC (2000)
REPAIR PROCEDURE:
THIS REPAIR IS COMPATIBLE WITH DAIMLERCHRYSLER'S MOBILE SERVICE PROGRAM AND DOES NOT REQUIRE HOISTS OR
OTHER FULL SERVICE FACILITY SPECIAL EQUIPMENT.
1.
Disconnect and isolate the battery negative cable.
2.
Disconnect the fuel pump module connector at the fuel pump module. The connector has a locking tab that must be released prior to
disconnecting. Slide the red lock tab back. Depress the lock tab and slide the connector apart.
3.
Connect the RFI module (p/n 04883825AD) to the harness and to the fuel pump module connector. Secure the connectors by sliding the red lock
tab back into its original position.
4.
Apply foam tape (p/n 04318028) to the back of the RFI module.
5.
Secure the RFI module by tie strapping (p/n 04856503) it to the truss bracket. The truss bracket is adjacent to the fuel tank rail and chassis rail.
6.
Connect the negative cable and reprogram the clock.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE AND FAILURE CODE