RAM 3500 Truck 4WD V8-5.9L VIN Z LDC (2000)
Actuator: Service and Repair
Removal and Installation
REMOVAL
1. Disconnect the vacuum and wiring connector from the shift housing.
2. Remove indicator switch.
Fig. 17
3. Remove the shift motor housing cover, gasket and shield from the housing (Fig. 17).
INSTALLATION
1. Install the shift motor housing gasket and cover. Ensure the shift fork is correctly guided into the shift collar groove.
2. Install the shift motor housing shield and attaching bolts. Tighten the bolts to 11 Nm (96 inch lbs.) torque.
3. Add 1.48 ml (5 ounces) of API grade GL 5 hypoid gear lubricant to the shift motor housing. Add lubricant through indicator switch mounting
hole.
4. Install indicator switch, electrical connector and vacuum harness.