RAM 3500 Truck 4WD V8-5.9L VIN Z LDC (2000)
Fig. 28
9. Remove release lever and release bearing from clutch housing. Apply Mopar high temperature bearing grease to bore of release bearing, release
lever contact surfaces and release lever pivot stud (Fig. 28).
Fig. 29
10. Apply light coat of Mopar high temperature bearing grease to splines of transmission input shaft (or drive gear) and to release bearing slide surface
of the transmission front bearing retainer (Fig. 29). Do not over lubricate shaft splines. This can result in grease contamination of disc.