RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
-
CATALYST FULL SERVICE REQUIRED
-
Set Two
-
EXHAUST SYSTEM - REGENERATION REQUIRED
-
EXHAUST FILTER XX% FULL
-
SERVICE REQUIRED - SEE DEALER NOW
-
EXHAUST SYSTEM - REGENERATION COMPLETED
-
EXHAUST SYSTEM - REGENERATION IN PROCESS
-
EXHAUST FILTER FULL - POWER REDUCED SEE DEALER
PERSONAL SETTINGS MODE (CUSTOMER PROGRAMMABLE FEATURES)
Allows the driver to set and recall features when the transmission is in Park by pressing and releasing the MENU button until Personal Settings is
displayed in the EVIC. If the transmission is not in PARK the EVIC will display NOT AVAILABLE and VEHICLE NOT IN PARK. The following
personal settings can be set and recalled by pressing the STEP button:
-
"LANGUAGE" - When in this display you may select one of three languages for all display nomenclature, including the trip functions. Press the
RESET button while in this display to select English, Espanol, or Francais. Then, as you continue, the information will display in the selected
language.
-
"AUTO DOOR LOCKS > YES" - When ON is selected, all doors will lock automatically when the vehicle reaches a speed of 15 mph (24 km/h).
To make your selection, press and release the RESET button until "ON" or "OFF" appears.
-
"AUTO UNLOCK ON EXIT > YES" - When ON is selected, all doors will unlock when the vehicle is stopped and the transmission is in the P
(Park) or N (Neutral) position and the driver's door is opened. To make your selection, press and release the RESET button until "ON" or "OFF"
appears.
-
"RKE UNLOCK DRV DR 1st" - When DRV DR 1st is selected, only the driver's door will unlock on the first press of the remote keyless entry
unlock button. When Driver Door 1st Press is selected, you must press of the remote keyless entry unlock button twice to unlock the passenger's
doors. To make your selection, press and release the RESET button until "DRV DR 1st " appears.
-
"RKE UNLOCK ALL DR 1ST" - When All ALL DR 1ST is selected, all of the doors will unlock on the first press of the remote keyless entry
unlock button. To make your selection, press and release the RESET button until "All DR 1st" appears.
-
"SOUND HORN W/LOCK > YES" - When ON is selected, a short horn sound will occur when the remote keyless entry "Lock" button is pressed.
This feature may be selected with or without the flash lights on lock/unlock feature. To make your selection, press and release the RESET button
until "ON" or "OFF" appears.
-
"FLASH LIGHTS w/LOCK > YES" - When ON is selected, the front and rear turn signals will flash when the doors are locked or unlocked with
the remote keyless entry transmitter. This feature may be selected with or without the sound horn on lock feature selected. To make your selection,
press and release the RESET button until "ON" or "OFF" appears.
-
"HEAD LAMP OFF DELAY > 0 SEC" - When this feature is selected, the driver can choose to have the headlights remain on for 0, 30, 60, or 90
seconds when exiting the vehicle. To make your selection, press and release the RESET button until "0," "30," "60," or "90" appears.
-
"KEY OFF POWER DELAY > OFF" - When this feature is selected, the power window switches, radio, hands-free system (if equipped), DVD
video system (if equipped) and power outlets will remain active for up to 60 minutes after the ignition switch is turned off. Opening a vehicle door
will cancel this feature. To make your selection, press and release the RESET button until "Off," "45 sec.," "5 min.," "10 min." appears.
-
"ILLUMINATED APRCH > OFF" - When this feature is selected, the headlights will activate and remain on for up to 90 seconds when the doors
are unlocked with the remote keyless entry transmitter. To make your selection, press and release the RESET button until "OFF," "30 sec.," "60
sec.," or "90 sec." appears.
-
"UNIT IN > US/METRIC" - The EVIC, odometer can be changed between English and Metric units of measure. To make your selection, press
and release the RESET button until "US" or "METRIC" appears.
-
"COMPASS VARIANCE > 1" - Press the RESET button to change the compass variance setting. See: Instrument Panel, Gauges and Warning
Indicators/Compass/Adjustments/Compass and Mini-Trip Computer Module/Manual Compass Calibration for additional information.
-
"COMPASS CALIBRATE > YES" - Press the RESET button to calibrate the compass. See: Instrument Panel, Gauges and Warning
Indicators/Compass/Adjustments/Compass and Mini-Trip Computer Module/Manual Compass Calibration for additional information.
COMPASS/TEMPERATURE/TRIP COMPUTER MODE
This display provides the outside temperature, one of the eight compass headings to indicate the direction the vehicle is facing, and vehicle trip
information. The compass and temperature display is the normal display. When the C/T button is pressed the EVIC returns to the compass/temperature
display from all other functions.
The trip computer function will be displayed if the STEP button is pressed from the Compass/Temperature display mode. The trip computer displays the
following information:
-
TRIP - Shows the total distance traveled since the last reset. To reset the TRIP function, press and hold the RESET button.
-
ELAPSED TIME - Shows the total elapsed time of travel since the last reset. Elapsed time will increment when the ignition switch is in the
ON/RUN or START positions.
-
UNIT IN US/METRIC - Press the RESET button to toggle between US and METRIC.
-
AVG. MPG - Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will show dashes for two seconds.
Then the history information will be erased, and the averaging will continue from the last fuel average reading before the reset. (Example: If your
Electronic Vehicle Information Center (EVIC) displays 18 AVG. MPG and the RESET button is pressed, the previous averaging history will be
erased and the display will return to the 18 AVG. MPG, not to 0 AVG. MPG). The display may take several miles for the value to change
