RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Brake Caliper: Removal and Replacement
Disc Brake Caliper Adapter Mounting Bracket - Removal
REMOVAL
1. Remove wheel and tire assembly.
2. Remove the disc brake caliper See: Disc Brake Caliper - Removal.
3. Remove the caliper adapter See: Disc Brake Caliper Adapter - Removal.
4. Remove the rotor See: Brake Rotor/Disc/Service and Repair/Removal and Replacement/Brake Rotor - Removal.
5. Remove the axle shaft, Differential and Driveline.
6. Remove the park brake shoes See: Parking Brake System/Parking Brake Shoe/Service and Repair/Removal and Replacement/Removal.
7. Remove the parking brake cable from the brake lever.
8. Remove the bolts (3) attaching the support plate to the axle and remove the support plate.
9. Remove the caliper adapter mount (1) from the axle housing (2).
Disc Brake Caliper Adapter Mounting Bracket - Installation
INSTALLATION
1. Install the caliper adapter mount (1) on the axle housing (2).
2. Install support plate on axle flange and tighten attaching bolts (3) to 203 Nm (150 ft.lbs.).