RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
6. Remove the axleshaft (1), refer to Differential and Driveline/Rear Axle.
7. Disassemble the rear park brake shoes (4).
Installation
INSTALLATION
NOTE: On a new vehicle or after parking brake lining replacement, it is recommended that the parking brake system be conditioned prior to
use. This is done by making one stop from 25 mph on dry pavement or concrete using light to moderate force on the parking brake
foot pedal.
1. Reassemble the rear park brake shoes (1).
